When the conveyor belt of the Food Metal Detector deviates, the following steps can be taken to troubleshoot the problem:
1. Check the tension of the conveyor belt
First, it is necessary to determine whether the tension of the conveyor belt is appropriate. If the conveyor belt is too loose, it is easy to deviate. You can observe the operation of the conveyor belt. If the conveyor belt appears to be loose or shaking during operation, then it is likely that its tension needs to be adjusted.
2. Adjust the bolts to adjust the tension
On the conveyor belt pallet bracket, there are usually two adjustment bolts near the outlet end of the conveyor belt. These two bolts are used to adjust the tension of the conveyor belt. Using a suitable tool (such as a screwdriver or wrench), gently turn these bolts to make the conveyor belt tension moderate.
3. Observe whether the tension on both sides is consistent
In the process of adjusting the tension, pay special attention to the consistency of the tension on both sides. If the tension on both sides is inconsistent, it will also cause the conveyor belt to deviate. Therefore, it is necessary to ensure that the tension on both sides is consistent by adjusting the two adjustment bolts.
4. Clean the conveyor belt to remove metal impurities
If the conveyor belt is contaminated by metal impurities, it may also cause the detector to falsely alarm or the conveyor belt to deviate. Therefore, it is necessary to clean the conveyor belt regularly, especially the part in the detection area, to ensure its cleanliness.
5. Check the surrounding environment
Sometimes, the conveyor belt deviation may be caused by the presence of high-power interference sources around the equipment, such as vibrating screens, motors or engines. These interference sources may generate electromagnetic interference and affect the normal operation of the detector. Therefore, it is necessary to ensure that there are no such interference sources around the equipment, or keep the equipment away from these interference sources.
The above steps can effectively eliminate the fault of the Food metal detector conveyor belt deviation. During operation, you need to pay attention to safety, ensure that the equipment is in the off state, and follow the relevant operating procedures. If the above methods cannot solve the problem, it is recommended to contact professional maintenance personnel for inspection and repair.
